• Link/Port Aggregation

Aggregation of up to 24 Ports or 12 links to a single or multiple output ports.

• Filter

Filters traffic by IP address, port number and physical input port.

• Load balancing

Load balances traffic by IP address, port number and physical input port.

• Duplicated traffic remover

This function fully automatically removes duplicated packets. This function is extremely important when monitoring multiple links and entities where the same traffic is usually captured more than once.

• 10G traffic demultiplexer

If highly loaded 10G links have to be monitored the traffic can be easily demultiplexed into 24 low traffic Gbit links.

• Flexible unit combination

Various units can be connected together – e.g. 240 input ports monitored at 24 output ports is straight forward and easy.

• Cross connect function

Packetmaster can work as layer 3 cross connect plus aggregator and filter.

• Jumbo Frame Support

The Packetmaster supports jumbo Ethernet frames with a size of up to 9000 Bytes – this feature is supported in all applications

• Modular software
  concept and easy
  upgrade capabilties

Because of its open hardware and its flexible and modular software concept the Packetmaster can grow with customers requirements.

• SFP and XFP Modules

For a maximum of flexibility the Packetmaster is designed to run with any kind of SFP and XFP

• Rugged 19” Housing

The Packetmaster is delivered in a ruggedized 19” 1U housing with precise connector labeling on the front panel.

• Different Power Versions

48 VDC or 230 VAC in dual and single power supply versions available.

• Management

Management is possible over RS232 and Ethernet. Moreover a special option for in-band management is also available.

• Easy use and operation

For straight-forward operation and supervision the Packetmaster supports SNMP and CLI.