CMC Series are high-performance 10G media converters for connecting different 10G devices and link. CMC Series functions as a copper-to-fiber converter, a fiber mode converter, or a fiber repeater. Five interface of CMC series are available and supported: RJ45 to SFP+, SFP+ to SFP+, SFP+ to XFP, RJ45 to XFP, and CX4 to SFP+.All CMC Series are equipped with real-time LEDs which display the status of each port. The built-in loopback functions make CMC Series ideal for troubleshooting by sending packets like BERT patterns to network equipment. For example, as a media converter, XG2 provides a bi-directionally conversion between 10GBASE-R (fiber) and 10GBASE-T (copper). If the ISP administrator would like to deploy FTTX services from central office to the user’s street or large organization building by fiber as the last mile connection, CMC could convert the media type from fiber to copper wire, and then distribute to any nearby location with 10Gbps Ethernet switch, or to xDSL modem via DSLAM. XG2 could also act as an auxiliary device for testing 10GBASE-T/ 10GBASE-R equipments by connecting NuStreams 10Gbps Ethernet fiber modules such as XM-28L1 and XM-28L1CX4. With various interfaces, CMC Series provide different conversions between fibers and copper wires in 10Gbps Ethernet.

KEY FEATURES

• Real-Time conversion between 10GBASE-T,
   10GBASE-R, and 10GBASE-CX4

Interface of 10GBASE-T based on IEEE 802.3an

Interface of 10GBASE-R based on IEEE802.3ae

Interface of 10GBASE-CX4 based on IEEE 802.3ak

• Conversion of media type between fiber (SFP+, XFP)
   and twisted pair copper wire (RJ-45, CX4)

• Real-time LEDs that display running status

SFP+ status: Indicate the SFP+ fiber connector is
   connected or not

LR status: Indicate the LR Transceiver or SR
   transceiver is plugged or not

Link/Rx status: Display the Network linked/Receive
   status

SFP+/Rx status: Display the Network linked/Receive
   status (For CMC-1 only)

Loopback status: Indicate the Loopback test
   status of  A and B ports

SYS status: Indicate system operation status

• Console for updating firmware and configuring  
  loopback functions

• Both SFP+ and RJ-45 port can connect to other   
  10Gbps Ethernet switch for expansion.

• Subsidiary device for test on 10Gbps Ethernet switch
  with 10GBASE-T and/or 10GBASE-R ports

KEY ADVANTAGES

• Fast connection with multi-function

• Provide reliable long-distance connection

• Wirespeed forwarding without bottleneck

• Simple and cost-effective conversion between
 10Gbps Ethernet fiber and copper

• Optimized for testing 10Gbps fiber network

• Port supported: SFP+, RJ-45, XFP, and CX4 connector

• Small portable size case

• Plug and play without extra configuration

• Full IEEE 802.3ae compliant

MAIN APPLICATIONS

• Media converter for network backbone

• Connection between fiber to copper or fiber to fiber
  10Gbps Ethernet equipment

• Can be applied in Telecommunication room, R&D
  laboratory, Data center, and etc.