Optical Budget

Singlemode networks   80 / 20 is the most common solution, but on request Cubro could offer all types of splitting ration from 95 / 5 until 50 /50. As special offer we also support adjustable splitting ratio.

Multimode networks 50 / 50 is the recommended solution but on request Cubro could offer all types of splitting ration from 95 / 5 until 50 /50. Attention on Multimode the optical budget is more problematic.

 See this whitpaper for more details !

Optical Connectors

 FC Connector

 LC Connector

 SC Connector

 MTRJ Connector

Gbit Converter TAP two Monitoring ports

Print
PDF

Written by Administrator | 26 April 2010

Want to monitor the traffic of an optical Gigabit Ethernet link with your existing monitoring equipment, which features only a 1000B-T electrical input? The 1GE Converter TAP is the right answer for this challenge. With its fully passive connection to the network it doesn´t influence the traffic of the optical network link while still allowing full access to the traffic via the electrical 1000B-T monitoring port.

 
/dual-converter-small.gif
  • Multimode and Singlemode

The network link can be either in
Multimode (850/1300nm) or Singlemode
(1310/1550nm). By default Cubro 1GE
Converter TAPs are delivered with SC
type connectors. Optional, the units
can also be equipped with FC or LC
connectors – according to your
requirements

  • Number of Monitoring Ports

By default Cubro 1GE Converter TAPs
come with four monitoring ports per
network link (two port per traffic direction).
For parallel monitoring (e.g. monitoring
system plus portable decoder) it is also
possible to double the monitoring ports
exists.

  • Fully passive

Optical Splitters installed at the network
link inputs allow fully passive connection
to the link under test. Thus the network link
is not interrupted even if the power supply
to the TAP fails. Moreover, the splitting ratio
is selectable according to the available
optical power budget.
  • LED Indicators

LED´s on the front panel provide fast and
easy indication of power-, link- and activity
status.

  • Various Cabinet versions available

With the 19” Mount Kit you can build the
portable TAP to flexible Cabinets.
One TAP in 19”, 1U; 2 different TAPs
(SM and MM) to 19” and much more

  • Easy to use and operate

Easy operation and installation. No PC or
software necessary. No bugs,
no software- updates
means more time for your business.

  • Different Power Versions

12VDC, 48VDC and also 230VAC
versions available.