Gbit TAP with four Monitoring ports

Print
PDF

Written by Administrator | 26 April 2010

Monitoring of electrical Gigabit Ethernet links is a critcial issue. But how to access 1000B-T network links without interfering the original data traffic ? CUBRO 1000B-T Copper TAPs provide an invisible, non-intrusive and permanent access

without link disruption or degradation.
/Gbit-Tap-4-monitoring-ports.gif

100% Throughput , very low delay
and fully transparent

Don´t miss any details of your signal.
Cubro Copper TAPs feature 100%
throughput, ultra low delay (less than
20cm of cable would have) and are fully
transparent, even to Layer 1 and Layer 2
faults.

Number of Monitoring Ports

By default Cubro 1000B-T Copper TAP's are delivered with two monitoring ports per network link (one port per traffic direction) For parallel monitoring (e.g. to connect a monitoring system plus a portable protocol decoder) also the possibility to double the monitoring ports exists.

 

Protects your network links

Cubro 1000B-T Copper TAPs incorporate latest technology to protect your important network links even if power supply to the TAP

Remote Management Interface

To get a better visibility into the network Cubro TAPs are remotely manageable via a 10M/100M Ethernet Interface and a standard web browser. To turn OFF/ON Monitoring Ports, verify the status of the network link or to check status of the power supply becomes straight forward and easy.(optional)

LED Indicators

LED´s on the front panel indicates power-,
link- and activity status.

Different Power Versions

48V DC or 230VAC power supply versions
available.

Easy to use and operate

Easy operation and installation.